4936 Monaco St

Commerce City, CO 80022

 

Phone: 303-227-0777

Fax: 303-227-0778

 

Contact Us

ColoradoCrete, Inc

 The leader in floor underlayment and leveling

Products


Gyp-Crete
The industry standard for use over wood subfloors in multi-family construction provides sound reduction and fire control. Its smooth surface is ideal for finished floor products.

Gyp-Crete 2000® /3.2K
Achieving strengths up to 3200 psi, designed for use in single family and light commercial construction, and ideal for renovation projects, Gyp-Crete 2000/3.2K is now “Green” building material.

Therma-Floor®
Designed specifically for “radiant floor” heating systems. Used over hot water tubes or electric cables, it provides the ideal thermal mass, plus fire and sound reduction. Therma-Floor is a “Green” building material.

Dura-Cap®
Ideal for smoothing concrete slabs or precast concrete planks in new or renovation projects. Covers old floor coverings, including asbestos vinyl tile. It can be poured 3 inches deep to a featheredge. Compression strengths up to 3,800 psi. Dura-Cap is a “Green” building material.

Commercial Topping®
Poured from featheredge to 3” in new construction or renovation projects. Achieves compressive strengths of 4000 to 4500 psi and pours over VAT, VCT, terrazzo or ceramic, with no shot blasting required. Commercial topping is a “Green” building material.

LEVEL-RIGHT®
A specially formulated, high-strength, cementitious underlayment that can handle any floor leveling challenge without shot blasting or scarifying. With compressive strengths up to 5,500 psi (38MPa), it is the perfect solution for problem floors in large projects or for small repair jobs. Level-Right is a “Green” building material.

LEVEL-RIGHT®PLUS
This 7,000 psi hydraulic cement product is ideal for new construction or renovations. You can level entire floors or transition areas from featheredge to deep fill.

LEVEL-RIGHT®FS-10
The ideal thin-topping, 0-3/8” (0-10 mm) application over concrete. Provides a smooth, level new surface that dries fast to keep your job on schedule, and to allow for placement of floor goods soon after application. Attains up to 7200 psi. 

LEVEL-RIGHT® WearTop
When old or damaged concrete floors need second life, Level-Right WearTop provides a new, smooth wear surface – fast. Get the look and the strength of new construction with less time and lower cost.

LEVEL-RIGHT® FeatherEdge
Level-Right FeatherEdge is specially formulated, fast setting, polymer-modified Portland cement-based patching compound. Mixed with water, it is used for patching over all gypsum underlayments, wood, and concrete subfloors. It can be used as an embossing leveler over vinyl, VCT, cement, terrazzo and old adhesives.

 

ACOUSTI-MAT®II
The low-profile (0.25”), cost-effective sound reduction system for both new floors and retrofits where the height is a concern. Acousti-Mat II increases IIC levels and STC ratings. Acousti-Mat II is a “Green” building material with 40% re-consumer recycled content and is GREENGUARD Children and School certified.

Enkasonic®
The original sound reduction mat (0.4”), which is a durable proven solution. Increases IIC levels and STC ratings. Enkasonic is a “Green” building material with 40% pre-consumer recycled content and is GREENGUARD Children and School certified.

Acousti-Mat® 3
For super sound reduction over concrete slab (0.8”), conventional wood frame, and even in open beam construction. Increases IIC levels and STC ratings. Acousti-Mat 3 is a “Green” building material with 40% pre-consumer recycled content and is GREENGUARD Children and School certified.

Acousti-Mat® LP
Acousti-Mat LP (5/32”) can be attached to concrete subfloor, then topped with a Maxxon Underlayment. The Acousti-Mat LP is permanently encased in the underlayment, so when the floor goods are changed the sound reduction system remains intact. Acousti-Mat LP or LRP can also be installed directly on the concrete or wood subfloor, or on top of Maxxon Underlayment in wood or steel frame construction for additional sound reduction and flatness. Floor goods such as floating wood, glued down wood, and/or tile can be installed directly on top of the Acousti-Mat LP or LPR.

Acousti-Mat® LPR
Acousti-Mat LPR is a low-profile sound reduction solution of an entanglement of mesh attached to a unique blend of polymeric fibers of various shapes and sizes. The blend of these fibers is a proprietary mix designed to provide excellent reductions in sound transmission and reflection. Floor covering may be installed directly to it. Acousti-Mat LPR is a “Green” building Material with 40% pre-consumer recycled content.

Maxxon®Crack Suppression Mat 
When project conditions require reinforcement of the underlayment, the new Maxxon CSM provides a cost-effective alternative to metal lath. Maxxon CSM is a “Green” building Material with 40% pre-consumer recycled content.

Maxxon DPM 
Damp Proof Membrane
Maxxon DPM (Damp Proof Membrane) is a unique 2-component moisture tolerant, high density, chemically enhanced epoxy product which prevents the passage of water vapor and moisture through concrete floors and walls on or above grade.

Mer-Krete™ Fracture Guard 5000
Mer-Krete Fracture Guard 5000 is a one-step, mold-resistant anti-fracture membrane. Fracture-Guard 5000 may be installed over any Maxxon-approved underlayment to receive ceramic and some stone tiles and is ideal for residential and commercial applications. When installed in accordance with the manufacturer’s specifications, Fracture-Guard 5000 will inhibit cracking.


Contact Us  |  Services  |  Products  |  Project Spotlight  |  Home

Copyright ©2011 ColoradoCrete, Inc.